1. Home
  2. Environmental testing
  3. Asbestos testing
  4. Adelaide

Asbestos testing in Adelaide

Fibro, eaves, wet areas and vinyl backing: if your Adelaide home or workplace was built before 1990, test before you renovate, buy or demolish.

Short answer

EnviroForce tests for asbestos across Adelaide. An inspector visually assesses suspect materials, takes small samples, seals the sample points and sends them to a NATA accredited laboratory. Reports are typically delivered within 24 hours. Workplaces built before 31 December 2003 must keep an asbestos register under SafeWork SA rules.

Regulator
SafeWork SA
Report
Typically within 24 hours
Analysis
NATA accredited laboratory
Bookings
24/7

Asbestos in Adelaide homes

Adelaide's post-war Housing Trust homes and 1960s to 1980s builds often contain asbestos in fibro sheeting, eaves, wet areas and roofing. Older stone villas may have asbestos in later additions and outbuildings.

Testing before renovating protects your family and tradespeople and avoids costly stop-work situations once demolition has started.

Areas we cover around Adelaide

  • Adelaide CBD
  • North Adelaide
  • Glenelg
  • Port Adelaide
  • Salisbury
  • Elizabeth
  • Modbury
  • Marion
  • Noarlunga
  • Mount Barker
  • Unley
  • Norwood
  • Gawler
  • Morphett Vale

Standard pricing covers properties within 50 km of the CBD or GPO of our service locations. Beyond that, travel is charged at 78 cents per kilometre, and we quote it before you book.

What we test

  • Fibro wall and eave linings
  • Bathroom, laundry and kitchen wet-area sheeting
  • Vinyl floor tiles and sheet backing
  • Roof sheeting, gutters and downpipes
  • Pipe lagging, flues and switchboard backing
  • Textured ceiling and wall coatings
  • Soil and mulch suspected of contamination

Workplaces: see asbestos registers and asbestos air monitoring. Renovating or demolishing: see pre-demolition reports.

Last reviewed October 2026 by the EnviroForce team

Common questions

Straight answers to the questions people ask us, and ask AI assistants, most often.

Does my house have asbestos?

If it was built or renovated before 1990, it may. Asbestos was used in fibro sheeting, eaves, wet-area linings, vinyl floor backing, roofing, pipe lagging and textured coatings until the national ban on 31 December 2003. You can't confirm it by eye. A sample analysed by a NATA accredited laboratory is the only reliable test. Asbestos in Australian homes.

Can I test for asbestos myself?

Home asbestos kits rely on you cutting into a suspect material, which can release fibres, and their results are not accepted for compliance. Asbestos can only be confirmed by a NATA accredited laboratory, usually by polarised light microscopy. A trained inspector samples safely and seals the spot.

How long do asbestos test results take?

Our asbestos reports are typically delivered within 24 hours of the inspection, once laboratory results are back.

What is the difference between friable and bonded asbestos?

Friable asbestos can be crumbled by hand and releases fibres easily, such as pipe lagging and some insulation. Bonded (non-friable) asbestos is locked in a material like fibro sheeting and is lower risk while it is in good condition and left undisturbed.

Who can remove asbestos?

Friable asbestos must be removed by a Class A licensed removalist. Bonded asbestos over 10 square metres needs a Class A or Class B licence. Small amounts of bonded asbestos may be removed by a competent person in some states, but rules vary, so check with your state regulator first.

How much does asbestos testing cost in Adelaide?

Metro jobs are quoted by phone based on the number of samples and type of report. Outside metro areas we add $160 plus GST per hour of driving, and weekend or out-of-hours work attracts a 50% surcharge. Call 1300 373 785 for a quote.

Book NATA accredited sampling.

Book online or call 1300 373 785. Technicians in every state and territory, with urgent bookings taken 24/7.